Closet Maid 6605 Leaflet

Part Chart  

Support Brackets needed per shelf:

1.2m

1.8m

2.4m

3.7m

Wall to Wall   

Pared a pared

1

1

2

3

Wall to Open

Pared a borde

2

2

3

4

Open to Open

Borde a borde

3

3

4

5

6605

1

2

3

75381 06605

0

1

01-84640

Consumer Toll-Free Help Line
1-800-874-0008 
(U.S.A and Canada)
www.closetmaid.com

Manufacturer reserves the right to change 
specifications without notice.

Made in USA
© ClosetMaid Corporation 2004
Ocala, FL 34478-4400

If a ClosetMaid® product does not give
user complete satisfaction when installed in
accordance with manufacturer's 
instructions, it will be exchanged free of
charge. Only the unsatisfactory part in a
multi-piece product will be exchanged. 

Push pre-loaded anchor into drilled hole. Use bottom of hammer 
handle to push in pin. For removal, pry pin out with screwdriver.

Empuje el tarugo preinstalado dentro del orificio perforado. Use 
la parte inferior del mango del martillo para empujar la clavija 
hacia adentro. Para remover, palanquee la clavija sacándola con 
un destornillador.

Level shelf. Drill 1/4" hole through wall using bracket as guide. DO 
NOT PUNCH HOLES. Space support brackets every 3’.

Nivele la repisa. Perfore un orificio de 6 mm a través de la pared usando 
el soporte como guía. USE TALADRO UNICAMENTE. Coloque los soportes 
a cada 91,5 cm de distancia.

Position support bracket on shelf as shown.

Coloque el soporte en la repisa tal como se muestra.