Nova 50-0-1818-30 User Manual

As shown in Figure 3, attach Left Keyboard Hanger securely 
to the underside of the worksurface using three (3) Screws 
(Ref. #9) and one (1) Screw (Ref. #10). Repeat procedure for 
other side.

IMPORTANT: The longer of the screws (Ref. #10) passes 
through the tubular section of the Keyboard Hanger allowing 
the assembly to be leveled by either tightening or loosening 
the screw. Adjusting the screws allows you to fine-tune the 
action of the keyboard drawer.

Install Trim Ring by snapping pieces together (Ref. #14 and 
#15), lowering into cutout, and attaching with four (4) screws 
(Ref. #12).

Step 9

Adjusting Your Monitor: The Monitor Support adjusts three 
ways — height (up/down), angle, and forward/backward. 
Adjust it so that you have a comfortable viewing angle of the 
monitor when you're in a normal working position. Push 
Outward Locking Tabs back to unlock keyboard drawer. See 
Figure 4. Remove the keyboard drawer and the glass. Lower 
the monitor through the viewport opening while allowing the 
wires to feed through the back of the monitor support. If the 
monitor is too heavy, make sure you get assistance.

Step 10.1

EXPLODED VIEW

T

Step 7

After installing the Keyboard Drawer, pull Outward Locking 
Tab forward to lock in place. See Figure 4.

Step 8