Philips SL111A1 User Manual

Page of 4
Features
Flush Unit: 2-1/2" (64mm) overall height, meets ADA requirements.
Ballast Channel: 0.05' (1.3mm) min. thick, 1-1/2' x 1-1/2' (38mm x 38mm) brushed 
and anodized extruded aluminum ballast channel. Provided with knock-outs and 
threaded holes to accept all mounting accessories.
Channel Cover: 0.04' (1mm) thick brushed and anodized aluminum ballast cover. 
Press-fit installation. No visible hardware.
Multi-Function Block (2): Solid brushed and anodized aluminum finish. Retains 
lampholder housing to the ballast channel. Also functions as a wireway for 
continuous rows and patterns.
Lampholder Housing (2): 0.08' (2mm) min. thick, 1' (25mm) square brushed and 
anodized aluminum with turret style locking socket. 
Plug Insert (2): 0.56" (14mm) dia. 0.31" (8mm) min. deep Solid brushed and anodized 
aluminum finish. Hide the holes at each end of ballast channel when luminaire is not 
row mounted.
Options and Accessories
Emergency Lighting: Electronic Bodine slim profile battery pack The emergency 
ballast senses the power failure and immediately switches to emergency mode  
by illuminating the lamp at a reduced lumen output for a minimum of 90 mins.  
The battery fully recharges within 24 hours. Add suffix (EM) to the catalogue 
numbers.
DALI Interface: Digital Addressable Lighting Interface available upon request  
for individual luminaires. Ballast 120 volts or 277 volts only. Consult your  
Lightolier representative.
Markings
cULus Listed. Suitable for damp locations.
Mounting
Direct Mount: Square canopies or invisible feed suitable for plaster ceiling, exposed 
ceiling or suspended ceilings mounts.
KUBIK 1.5 
SL111A1
Page 1 of 4 
Bare Lamp Flush Unit
Dimensions
Ordering guide 
(complete luminaire consist of unit & power feed)
  Unit/Louver Cat. No. 
Lamp (linear) 
Volts 
Ballast Type 
Finish
 
 SL111A128PIU 
 
120/277V 
 
 SL111A128PIH 
1 -28W T 5
 
347V 
Programmed Rapid Start
 
 SL111A154PIU 
 
120/277V
 
 SL111A154PIH 
 
347V 
 
Brushed and Anodized Aluminum
 
 SL111A154MZ1 
1-54W T5 HO 
120V
 
 SL111A154MZ2 
 
277V 
Dimming Mark 10
 
 SL111A154PCU 
 
120/277V 
Dimming PowerSpec HDF
46-3/16"
(1173mm)
1-1/2"
(38mm)
1"
(25mm)
2.5"
(64mm)
Ballast Channel
Channel Cover
Lampholder Housing
Multi-Function Block
Plug Insert
Lightolier 
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A1.pdf
Canlyte 
www.canlyte.com
3015 Louis-Amos, Lachine, Québec  H8T 1C4 • (514) 636-0670 • (514) 636-0460
Job Information 
Type:
Job Name: 
Cat. No.: 
Lamp(s): 
Notes:
 
Suspended Mount: Single stem or aircraft cable with round canopy suitable  
for mounting on a standard outlet box for plaster ceiling, exposed installation  
or suspended ceilings mounts. Stem and cable mounts can both be used on  
the same luminaire.
Patterns: Suitable for different patterns in continuous row mounting.
Wall Mount: Can be wall mounted vertically or horizontally.
Electrical
Ballast: Electronic slim profile 1 lamp 28W T5 or 54W T5H0 linear ballast.
U: Universal voltage ballast automatically detects 120V to 277V, 50 or 60Hz 
operations.
1: 120V ballast only.
2: 277V ballast only.
H: 347V ballast only.
Lampholder: G5 plug-in base, miniature Bi-pin.
Finish
Natural brushed and anodized aluminum. All painted parts are powder coat  
paint process.
Lightolier is a Philips group brand