RSA Lighting AH60BHW Leaflet

www.cooperlighting.com

Thermal
Protector

Separate Wiring Compartment

18” flexible conduit

4.65”

23.23”

24.05”

24.73”

26.02”

7.95”

9.27”

6.15”

4.65”

1.60”

9.25”

20.55” 

7.45” 

Required 

above 

ceiling

Integral Electronic Metal 

Halide Ballasts

45º x 45º

Adjust

Double 
Gimbal

Housing and junction box are aluminum,  

trim assembly is steel with powder coated 

finish.  Fixture utilizes a removable trim 

sleeve to provide a 0.75” flange around 

the ceiling opening and to help conceal 

the inner hardware of the fixture from sight 

below the ceiling.  Can accommodate 

various ceiling thickness. 

Thermal protection provided to guard 

against overheating and misuse of 

insulation over and around fixture. Vent 

holes in housing provide cooler operation.

Junction Box is UL listed for through branch 

wiring, 6 #12 90º C supply conductors or 

60º C for end of run. The fixture is also UL 

listed as ‘access above ceiling not required’. 

Integral electronic metal halide ballasts are 

mounted in a separate metal enclosure 

box attached to the junction box with 

18” of flexible conduit. Ballast enclosure 

includes a separated wiring compartment 

and two knockouts for conduit entry and 

features a perforated metal door for easy 

maintenance access and cooler operation. 

Entire electrical assembly (jbox and ballast 

enclosure) is removable from the housing 

for easy maintenance.

Five (5) PAR20 Metal Halide lamps 

mounted in adjustable double gimbal. 

Lamp holders are  removable and may be 

regressed 1” for additional cut-off. Lamps 

can accept up to three optical accesso-

ries (i.e. lens + hex louver + snoot). 45º x 

45º locking lamp adjustment.  Beveled-

edge lamp ring is secured with thread-

less, bayonet action. Optional retractable 

arm is available for lamp pulldown and 

extreme aiming. Includes Med. Base 

sockets.

A mounting frame is provided which 

inserts into the ceiling opening. The 

housing is then pushed through the 

mounting frame and secured with 

screws.

 

cULus listed for non-type IC 

applications, suitable for use in damp 

locations.

Ceiling Cut-Out: 5.90” x 24.32”

An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for 
downlighting and accent applications. Utilizes FIVE (5) PAR20 Metal Halide 
lamps.

For remodel applications. Insulation must be kept 3” from all sides and at least 
1” above the housing.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031

 

rev 022408

  COMBOLIGHT  

Recessed Five (5) Light

  Remodel

 

  20 Watt PAR20 Metal Halide 

  39 Watt PAR20 Metal Halide

   Electronic Metal Halide 

Ballast

 120V

 277V 

  Double Gimbal 

  Retractable Double Gimbal

  White 

 Black 

 Industrial Silver

  0.75” Trim Flange

  White 

 Black 

 Industrial Silver

For use with 20W or 39W PAR20 Metal Halide lamps.