RSA Lighting 500ERV Leaflet

www.cooperlighting.com

18” flexible conduit

13.38”

14.20”

19.70”

9.48”

 9.95”

11.31”

13.01”

1.70”

9.45” 

Required 

above 

ceiling

45º x 45º

Adjust

Double 
Gimbal

6.69”

Thermal
Protector

Perforated
Meshplate

Separate Wiring

Compartment

9.25”

4.10” 

Integral Electronic 

Metal Halide Ballasts

Housing and junction box are aluminum,  

trimless meshplate is steel with powder 

coated finish.  Perforated meshplate 

allows for trimless installation in drywall/

plaster ceilings by allowing the ceiling’s 

mudding compound to be applied right 

up to the edge of the fixture opening.  

Includes a beveled “knife-edge” lips to 

ensure a clean edge. Can accommodate 

various ceiling thickness. 

Thermal protection provided to guard 

against overheating and misuse of 

insulation over and around fixture. Vent 

holes in housing provide cooler operation.

Junction Box is UL listed for through branch 

wiring, 6 #12 90º C supply conductors or 

60º C for end of run. The fixture is also UL 

listed as ‘access above ceiling not required’. 

Integral electronic metal halide ballasts are 

mounted in a separate metal enclosure 

box attached to the junction box with 

18” of flexible conduit. Ballast enclosure 

includes a separated wiring compartment 

and two knockouts for conduit entry and 

features a perforated metal door for easy 

maintenance access and cooler operation. 

Entire electrical assembly (jbox and ballast 

enclosure) is removable from the housing 

for easy maintenance.

One (1) PAR38 Metal Halide lamp 

mounted in adjustable double gimbal. 

Lamp holder is  removable and may be 

regressed 1” for additional cut-off. Lamp 

can accept optical accessories. 45º x 45º 

locking lamp adjustment.  Beveled-edge 

lamp ring is secured with threadless, bay-

onet action. Optional retractable arm is 

available for lamp pulldown and extreme 

aiming. Includes Med. Base socket.

Mounting clips are provided which 

mount the housing edge flush with the 

finished ceiling line. Mounting clips are 

secured to the housing through the 

meshplate with screws.

 

cULus listed for non-type IC 

applications, suitable for use in damp 

locations.

Ceiling Cut-Out: 7.80” x 7.80”

An adjustable Single-lamp Recessed fixture for trimless installation suitable 
for downlighting and accent applications. Utilizes ONE (1) PAR38 Metal Halide 
lamp.

For remodel applications. Insulation must be kept 3” from all sides and at least 
1” above the housing.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031

 

rev 050108

For use with 70W or 100W PAR38 Metal halide lamps.

  COMBOLIGHT 

Recessed One (1) Light

  Remodel 

  70 Watt PAR38 Metal Halide 

  100 Watt PAR38 Metal Halide

   Electronic Metal Halide 

Ballast

 120V

 277V 

  Double Gimbal 

  Retractable Double Gimbal

  Trimless

  Trimless

  White 

 Black 

 Industrial Silver