Honeywell 5820XL User Manual

This product cannot be adjusted or repaired in the field. It must be returned to the factory for 
service.

This equipment is not designed for use with party line service. Connection to party line 
service is subject to state tariffs. You may contact the state public utility commission, public 
service commission or corporation commission for information.

Since the 5820XL is a commercial fire alarm panel, it must be connected upstream of all other 
equipment utilizing the phone lines. If you have questions about the installation, contact your 
telephone company or a qualified installer.

General requirements are described in this section. When installing an individual device, refer 
to the specific section of the manual for additional requirements. The following subsections 
list specific requirements for each type of installation (for example, Central Station Fire 
Alarm systems, Local Protected Fire Alarm systems, and so on). See Section 8.7 for 
information on releasing operation.

1. All field wiring must be installed in accordance with NFPA 70 National Electric Code.

2. Use the addressable smoke detectors specified in Section 5.2 of this manual and or con-

ventional detectors listed in the compatibility chart. (See Appendix A.)

3. Use UL listed notification appliances compatible with the 5820XL from those specified in 

the Appendix at the back of this manual.

4. A full system checkout must be performed any time the panel is programmed.

This device has been verified to comply with FCC Rules Part 15. Operation is subject to the following conditions: 
(1) This device may not cause radio interference, and (2) This device must accept any interference received, 
including interference that may cause undesired operation.