Marantz NR1604 User Manual
99
Panel lock function
To prevent accidental operation of this unit, you can disable operation
of the buttons on the front panel.
X ON/STANDBY
VOLUME
DISPLAY
M-DAX
STATUS
INTERNET RADIO
ZONE2 SOURCE
n Disabling all key button operations
1
Press
X
while you press and hold
DISPLAY
and
M-DAX
with the unit in standby mode.
2
Press
INTERNET RADIO
or
ZONE2 SOURCE
to select
“FP/VOL LOCK On”.
3
Press
STATUS
to enter the setting.
All button operations except
X
are disabled.
n Disabling all button operations except VOLUME
1
Press
X
while you press and hold
DISPLAY
and
M-DAX
with the unit in standby mode.
2
Press
INTERNET RADIO
or
ZONE2 SOURCE
to select
“FP LOCK On”.
3
Press
STATUS
to enter the setting.
All button operations except
X
and
VOLUME
are disabled.
Dual backup memory function
The unit stores settings information in nonvolatile memory even when
the main power supply is turned off. Using the Dual Backup Memory
function, you can write settings information to another memory area to
back up saved settings for recovery anytime as needed. Remembering
set details (Backup).
DISPLAY
INTERNET RADIO
ZONE2 SOURCE
n Remembering set details (Backup)
Set the unit in the state you want remembering, and press
and hold
INTERNET RADIO
and
ZONE2 SOURCE
for at
least 3 seconds.
“MEMORY SAVING” is shown in the display, and the setting details
are remembered.
NOTE
• The volume is not remembered.
• If remembered details are overwritten, the previously remembered
contents are deleted.
n Recalling remembered details (Recovery)
Press and hold
DISPLAY
and
INTERNET RADIO
together
for at least 3 seconds.
“MEMORY LOAD” is shown in the display, and the remembered
details are recalled.
NOTE
• If there is no remembered data, “NO BACKUP” is shown in the
display, and no remembered details are recalled.
• As the volume cannot be recalled, it returns to the factory setting
volume.
n Canceling the Panel lock function
1
Press
X
while you press and hold
DISPLAY
and
M-DAX
with the unit in standby mode.
2
Press
INTERNET RADIO
or
ZONE2 SOURCE
to select
“FP LOCK
z
Off”.
(z The currently set mode.)
3
Press
STATUS
to enter the setting.
The Panel lock function is canceled.
Even when the Panel lock function is set, you can operate the unit
using the remote control unit.
Basic instructions
Advanced instructions
Information
Advanced instructions
DVD