Marantz NR1604 User Manual

157

GRemote control unitH

The set cannot be 

operated with the 

remote control unit.

• Batteries are worn out. Replace with new batteries.

• Operate the remote control unit within a distance of about 

 

23 ft/7 m from this unit and at an angle of within 30°.

• Remove any obstacle between this unit and the remote control 

unit.

• Insert the batteries in the proper direction, checking the q and 

w marks.

• The set’s remote control sensor is exposed to strong light (direct 

sunlight, inverter type fluorescent bulb light, etc.). Move the set 

to a place in which the remote control sensor will not be exposed 

to strong light.

• The setting of the zone to operate does not match. Press 

 or 

 to select the zone to operate.

Perform this procedure if the display is abnormal or if operations cannot be performed.

Note that when the microprocessor is reset, all the settings are reset to their default values.

X

X

X

If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.

DVD