Marantz ES7001 User Manual

Page of 25
22
ENGLISH
T h e   s e c t i o n   d e s c r i b e s   t h e   c a r e   a n d 
maintenance tasks that must be performed 
to optimize the operation of your Marantz 
component. 
7
  Cleaning of equipment external 
surfaces
The exterior finish of your unit will last 
indefinitely with proper care and cleaning, 
Never use scouring pads, steel wool, scourging 
powders or harsh chemical agents (e.g., lye 
solution), alcohol, thinner, benzine, insecticide 
or other volatile substances as these wil mar 
the finish of the equipment.  Likewise, never 
use cloths containing chemical substances. 
If the equipment get dirty, wipe the external 
surfaces with a soft, lint-free cloth. 
If the equipment becomes heavily soiled: 
 • dilute some washing up liquid in water, in 
a ratio of one part detergent to six parts 
water. 
  •  dip a soft, lint free in the solution and wring 
the it is damp. 
  •  wipe the equipment with the damp cloth. 
 • dry the equipment by wiping it with a dry 
cloth.
OTHERS
7
 Repairs
Only the most competent and  qualified 
service technicians should be allowed to 
service the factory-trained warranty station 
personnel have the knowledge and special 
facilities needed for repair and calibration of 
this precision equipment. After the warranty 
period has expired, repairs will be performed 
for a charge if the equipment can be returned 
to  normal operation. 
In the event of difficulty, refer to your dealer or 
write directly to the nearest location to you that 
is listed on the Marantz Authorized Service 
Station list. If writing, please include the model 
and serial number of the equipment together 
with a full description of what you think is 
abnormal about the equipment’s behaviour. 
SPECIFICATIONS
 
Audio power amplifier
Rated power output (20 Hz-20 kHz / THD = 0.05%)
   
.........................................26 
W/ch 
Maximum power output (1 kHz/JEITA)
   
.........................................30 
W/ch 
Frequency characteristics
 
Analog input: ANALOG IN 1
 
 
 ........................20 Hz-20 kHz (± 3 dB)
 
Digital input: PCM 44.1 kHz
 
 
 ........................20 Hz-20 kHz (± 3 dB)
 
S/N ratio: PCM 44.1 kHz
   
................................................ 100 
dB
 
Decoding
Compatible playback signal formats
 
PCM audio (fs = 32 kHz, 44.1 kHz, 48 kHz)
 DOLBY 
DIGITAL
 dts
 AAC
 Binaural
 
Power supply
Power requirements ............. AC 120 V, 60 Hz
Power consumption ............................... 40 W
   
............ 125 
(6Ω, 30 W x 2 outputs)
Power consumption in standby mode ... 0.8 W
 
Input
OPT IN (optical digital) ...................... 3 inputs 
HDMI  IN (Version 1.1) ...................... 2 inputs
ANALOG IN ......................... 2 inputs (stereo)
 
Output
HDMI OUT (Version 1.1) .................. 1 output
SUB W. PREOUT ............................. 1 output
REMOTE OUT .................................. 1 output
 
Speakers
Tweeter ............ 1.9 cm (3/4 inches) dome x 2
Midrange ............8 cm (3 1⁄4 inches) cone x 2
Woofer .............12 cm (4 3⁄4 inches) cone x 2
 
Dimensions (unit)
Width   .................1,080 mm (42 9/16 inches)
Height  ......................153 mm (6 1/16 inches)
Depth   ....................144 mm (5 11/16 inches)
Mass (unit) ..........................12 kg (26 lb 7 oz)
 
Supplied accessories
Remote controller ........................................ 1
AAA batteries .............................................. 2
User Guide (this manual) ............................. 1
Note:
The speaker nets cannot be removed.
1080
153
144
2
Specifications subject to change without prior notice.
ES7001_U_01_Eng.indd   22
ES7001_U_01_Eng.indd   22
07.7.31   1:42:38 PM
07.7.31   1:42:38 PM