Samsung HT-X40 User Manual

• When playing a DVD disc encoded with two or more channels, multi-channel mode will be

selected automatically and 

(Dolby Pro Logic II) button does not work.

Press the 

button to select 

mode.

Press the 

button to select 

, then press the Cursor

,

button to select the desired effect setting.

You can select either 0 or 1.
This mode extends the front stereo image to include the surround speakers for an exciting
"wraparound" effect with side wall imaging.

Press the 

button to select 

, then press

the Cursor

,

button to select the desired effect setting.

You can select between 0 and 7.
This sets the width of the center image. The higher the setting, the less sound comes from 
the center speaker. 

Press the

button to select 

, then press the Cursor

,

button to select the desired setting

You can select between 0 and 6.
Incrementally adjusts the sound field (DSP) from the front or rear.

Press the 

button to select the FM band.

Tune in to the desired station.

Automatic Tuning 1 : When the 

button is pressed, a preset broadcast station is selected.

Automatic Tuning 2 : Press and hold the 

button to automatically search for active 

broadcasting stations.

Manual Tuning : Briefly press the 

button to increase or decrease the frequency incrementally.

Press the 

button to select the FM band.

Select a broadcast station.

Automatic Tuning 1 : Press the 

(

) button to select 

and then press 

the

button to select the preset station.

Automatic Tuning 2 : Press the 

(

) button to select 

and then press and 

hold the

button to automatically search the band.

Manual Tuning : Press the 

(

) button to select 

and then briefly press 

the

button to tune in to a lower or higher frequency.

Press the 

button to listen in Mono/Stereo. 

Each time the button is pressed, the sound switches between 

and

.

In a poor reception area, select MONO for a clear, interference-free broadcast.

X40(40~63P) SEA  2007.2.8  2:52 PM  Page 52