Runco LS-10I User Manual

Table 3-1 gives a quick overview of the LS-10i installation process. The sections following 
this one provide detailed instructions. 

1

Choose a location for the projector

2

Install anamorphic lens mounting assembly (optional)

3

Mount the projector

4

Connect signal sources to the LS-10i

5

Connect external controller to RS-232 port and/or IR repeater 
system (optional)

6

Connect 12-volt trigger output to retractable screen or other, 
+12V trigger-activated equipment (optional)

7

Apply power to the projector 

8

Primary lens adjustments: projected image size (zoom), position 
(shift) and focus

9

Change the OSD Language (optional)

10

For rear-screen and/or ceiling-mount installations, select the 
proper picture orientation 

11

Install and adjust secondary anamorphic lens (optional)

12

Projector calibration: adjust the following for each input; save 
settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
• White Balance