Runco LS-10I User Manual

Page of 112
20
Runco LS-10i Installation/Operation Manual
PRE
L
IMINAR
Y
Figure 3-5. Horizontal Lens Shift (Example Only)
Vertical Lens Shift: The LS-10i zoom lenses (Proteus 2 through 6) provide up to 65% of 
vertical lens shift in either direction (up or down). For example, with a 96 x 54-inch (16:9) 
screen, you can shift the image up to 35.10 inches (0.89 meters) above or below the 
screen center. (Vertical lens shift is not possible with the Proteus 1 lens.)
Horizontal Lens Shift: The LS-10i zoom lenses (Proteus 2 through 6) allow up to 30% of 
horizontal lens shift in either direction (left or right). For example, with a 96 x 54-inch (16:9) 
screen, you can shift the image up to 28.80 inches (73.15 cm) left or right of the screen 
center. (Horizontal lens shift is not possible with the Proteus 1 lens.)
0%
Screen Center
100% Width Lens Shift
(1.0 x W)
50% Width Lens Shift 
(0.5 x W)
Screen Width (W)
Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular 
lens or projector is used in this example.