Runco LS-10I User Manual
48
Runco LS-10i Installation/Operation Manual
PRE
L
IMINAR
Y
4:3
4:3 linearly scales the
source active image
horizontally and vertically
to fill a 4:3 rectangle
which is centered and
the same height as the
16:9 designated image
area. The remaining area
is black.
source active image
horizontally and vertically
to fill a 4:3 rectangle
which is centered and
the same height as the
16:9 designated image
area. The remaining area
is black.
16:9
4:3
Virtual-
Wide
A 16:9 image is shrunk
horizontally in the center
and stretched
horizontally in a
NON-linear fashion (more
on the sides).
horizontally in the center
and stretched
horizontally in a
NON-linear fashion (more
on the sides).
A 4:3 image is
horizontally scaled in a
NON-linear fashion (more
on the sides than in the
center) to fit a 16:9
screen.
horizontally scaled in a
NON-linear fashion (more
on the sides than in the
center) to fit a 16:9
screen.
16:9
4:3
Table 4-2. Aspect Ratio Settings (continued)
Aspect
Ratio
Setting
Description
Aspect
Ratio of
Source
Signal
Geometry of Projected Image
With Standard Lens
(1.78:1 Screen)
With Anamorphic Lens (2.35:1 Screen)