Runco Q-750D User Manual
62
Q-750d Series Installation/Operation Manual
PRE
L
Y
Table 4-2 lists the x- and y-coordinates for each color temperature preset.
(Low/Medium/High) or disable (Off) ConstantContrast in the optical engine.
ConstantContrast uses a dynamic iris that modulates light to the DMD based on the
actual content of the video material. Runco recommends that you disable
ConstantContrast before adjusting Brightness, Contrast or other image settings.
ConstantContrast uses a dynamic iris that modulates light to the DMD based on the
actual content of the video material. Runco recommends that you disable
ConstantContrast before adjusting Brightness, Contrast or other image settings.
gamut (range) that may be different from the default color gamut.
Each setting defines the precise hue of each primary (red, green and blue) and
secondary (yellow, cyan and magenta) color component used to generate the millions
of colors produced in displays. Changing this setting relocates the “triangle” for
possible colors (see Figure 4-7). For example, changing the x/y coordinates for red
moves the color closer to either orange or violet, which in turn affects all displayed
colors having a red component.
secondary (yellow, cyan and magenta) color component used to generate the millions
of colors produced in displays. Changing this setting relocates the “triangle” for
possible colors (see Figure 4-7). For example, changing the x/y coordinates for red
moves the color closer to either orange or violet, which in turn affects all displayed
colors having a red component.
• Auto automatically chooses the appropriate color gamut:
• SMPTE-C for NTSC, 480i and 480p sources.
• EBU for PAL, SECAM, 576i and 576p sources.
• REC709 for all other sources.
• REC709 chooses the REC709 color gamut.
• Select SMPTE-C to use the color gamut defined in SMPTE 170M-1999.
• Select EBU to use the color gamut defined in EBU Tech. 3213-E.
• Select Native for Runco's recommended Personal Color Equalizer preset for typical
video sources. It displays the fully saturated LED color gamut with appropriate color
brightness, hue, and Runco Smart Color settings.
brightness, hue, and Runco Smart Color settings.
• Select DCI to use the color gamut defined in Digital Cinema System Specification
Version 1.2.
• Select PCE to use the Personal Color Equalizer feature of the Q-750d. PCE lets you
define a custom color gamut. Refer to the next section, PCE, for instructions on how to
do this.
do this.
Table 4-2. Color Temperature Presets and Associated Color Points
Color Temperature Preset
Associated x/y Values
x
y
5500K
0.332
0.348
6500K
0.313
0.329
7500K
0.299
0.315
9300K
0.284
0.298
The DHD Controller uses the Color Gamut settings for all display
modes on a given input.
modes on a given input.
Note