Runco LS-7 User Manual
16
Runco LS-7 Installation/Operation Manual
PRE
L
IMINAR
Y
Table 3-3 lists the available LS-7 Series lens options and their associated throw ratios.
Vertical and Horizontal
Position
Proper placement of the projector relative to the screen will yield a rectangular,
perfectly-centered image that completely fills the screen.
perfectly-centered image that completely fills the screen.
Ideally, the projector should be positioned perpendicular to the screen and in such a way
that the lens center is aligned with either the top or bottom edge of the screen area, and
centered horizontally. See Figure 3-3.
that the lens center is aligned with either the top or bottom edge of the screen area, and
centered horizontally. See Figure 3-3.
Figure 3-3. Projector Placement
Table 3-3. Throw Ratios for the LS-7 Series
Projector Model
Throw Ratio
Throw Range in inches, with 72.6x40.8-inch
(1.78:1) Screen
Minimum
Maximum
Standard LS-7
1.85 – 2.40
134.31
174.24
Standard LS-7 with
Optik A Primary Lens
Optik A Primary Lens
1.56 – 1.86
113.26
135.03
➤
Screen
Height
Projection Distance
Ceiling
x
Lens Center
Lens Center
Ceiling Installation
Screen
Height
Floor
Lens Center
Projection Distance
Floor Installation
Lens Center
x