Runco LS-7 User Manual
Runco LS-7 Installation/Operation Manual
29
PRE
L
IMINAR
Y
3.9
Adjusting the Picture
Orientation
Adjusting the Picture
Orientation
If the LS-7 is installed behind the screen, you must change the picture orientation to
match the installation method. To do this, press MENU on the remote control. Then,
select System from the Main Menu.
match the installation method. To do this, press MENU on the remote control. Then,
select System from the Main Menu.
Rear Projection
If the projector is used in a rear-projection application (see Figure 3-6), press
repeatedly
to select Rear Projection from the System Menu. Press
or
to set it to On.
Ceiling Mode
If the projector is ceiling-mounted, the LS-7 automatically inverts the image. If this
automatic inversion is not desired, select Ceiling Mode from the System Menu and set it to
Off.
automatic inversion is not desired, select Ceiling Mode from the System Menu and set it to
Off.