Runco SC-50D User Manual
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
79
PRE
IMINAR
Y
Front Panel Brightness: Select Front Panel Brightness from the Service menu to adjust
the brightness of the front-panel LED and LCD status indicators.
the brightness of the front-panel LED and LCD status indicators.
brightness of the large, illuminated logo on the left side of the display. The range is from
0 (off) to 31.
0 (off) to 31.
the behavior of the front-panel STANDBY indicator LED. When set to ON, the LED
lights amber when the system is in standby mode; otherwise, it is off. When set to OFF,
the LED is always off.
lights amber when the system is in standby mode; otherwise, it is off. When set to OFF,
the LED is always off.
front-panel LCD. The range is from 0 (off) to 4.
Auto Power Off: Select Auto Power Off from the Service menu to have the
SC-50d/SC-60d turn itself off after a period of inactivity (no source signal present).
SC-50d/SC-60d turn itself off after a period of inactivity (no source signal present).
Auto Power Off sub-menu and set it to On.
• Hours: The default time-out period is eight (8) hours; the range is from 1 to 24 hours.
System Reset: To reset ALL controller settings (including image settings) back to their
factory defaults, choose System Reset from the Service menu.
factory defaults, choose System Reset from the Service menu.
A confirmation message appears. Select Yes to continue with the reset or select No to
cancel.
cancel.
During a firmware upgrade, this LED lights at full brightness
regardless of the Logo LED setting.
regardless of the Logo LED setting.
During a firmware upgrade, this LED lights at full brightness
regardless of the Standby LED setting.
regardless of the Standby LED setting.
This action is not undoable. Proceed with caution! Before you
perform a System Reset, save your “Custom” Memory Presets
(page 62) and ISF Day/Night Memory Presets (page 68).
perform a System Reset, save your “Custom” Memory Presets
(page 62) and ISF Day/Night Memory Presets (page 68).
Logo LED
LCD
Standby LED
Note
Note
Caution