Runco LS-100d User Manual

Page of 114
40
Lightstyle™ Series LS-100d Installation/Operation Manual
PRE
L
IMINAR
Y
The Screen Menu allows you to recall multiple sets of stored values for certain controls 
(Output Shift and Image Alignment) that are saved for each aspect ratio. Such settings are 
also saved “per screen.” To recall the Output Shift and Image Alignment settings 
associated with “Screen 1” or “Screen 2,” make that selection here.
Use the controls in the Picture Menu to calibrate each DHD Controller input to achieve 
optimum picture quality.
The DHD Controller has been designed to incorporate setup and calibration standards 
established by the Imaging Science Foundation (ISF). The ISF has developed carefully 
crafted, industry-recognized standards for optimal video performance and has 
implemented a training program for technicians and installers to use these standards to 
obtain optimal picture quality from Runco video display devices. Accordingly, Runco 
recommends that setup and calibration be performed by an ISF certified installation 
technician.
All signal types require separate processing. Therefore, you need to calibrate each DHD 
Controller input separately. 
Although it may be possible to obtain satisfactory picture quality using the naked eye and 
regular program material, Runco recommends using an external test pattern source 
(Ovation Multimedia, Digital Video Essentials or AVIA test DVD or equivalent) for best 
results.
Connect your test pattern source to the input that you are calibrating and proceed as 
follows. Perform the adjustments in the order listed here.
Screen 1
Screen 2
When you change a picture quality setting, save the change to a 
preset afterwards. Otherwise, the change will be lost when a 
different input is selected. (Picture quality settings are saved for 
each input separately.) For information about saving settings, refer 
to Memory Presets on page 46. 
Note