Runco LS-100d User Manual
Lightstyle™ Series LS-100d Installation/Operation Manual
51
PRE
L
IMINAR
Y
select a color gamut (range) that may be different from the default color gamut.
Each setting defines the precise hue of each primary (red, green and blue) and
secondary (yellow, cyan and magenta) color component used to generate the millions
of colors produced in displays. Changing this setting relocates the “triangle” for
possible colors (see Figure 4-7). For example, changing the x/y coordinates for red
moves the color closer to either orange or violet, which in turn affects all displayed
colors having a red component.
secondary (yellow, cyan and magenta) color component used to generate the millions
of colors produced in displays. Changing this setting relocates the “triangle” for
possible colors (see Figure 4-7). For example, changing the x/y coordinates for red
moves the color closer to either orange or violet, which in turn affects all displayed
colors having a red component.
• Auto automatically chooses the appropriate color gamut:
• SMPTE C for NTSC, 480i and 480p sources.
• EBU for PAL, SECAM, 576i and 576p sources.
• REC709 for all other sources.
• Select REC709 to use the color gamut defined in ITU-R BT.709-5.
• Select SMPTE-C to use the color gamut defined in SMPTE 170M-1999.
• Select EBU to use the color gamut defined in EBU Tech. 3213-E.
• Select Native for Runco's recommended Personal Color Equalizer preset for typical
video sources. It displays the fully saturated LED color gamut with appropriate color
brightness and hue settings.
brightness and hue settings.
• Select DCI to use the color gamut defined in Digital Cinema System Specification
Version 1.2.
• Select PCE to use the Personal Color Equalizer feature of the LS-100d. PCE lets you
define a custom color gamut. Refer to the next section, PCE, for instructions on how to
do this.
do this.
Table 4-3 lists the Color Gamut settings and associated x- and y-coordinates for each
primary and secondary color component.
primary and secondary color component.
The DHD Controller uses the Color Gamut settings for all display
modes on a given input.
modes on a given input.
Table 4-3. x/y Color Gamut Values
Color
Component
Color Gamut Settings and Associated x/y Values
REC709
SMPTE “C”
EBU
DCI
x
y
x
y
x
y
x
y
Red
0.640
0.330
0.635
0.340
0.640
0.330
0.680
0.320
Yellow
0.419
0.505
0.421
0.506
0.418
0.502
0.425
0.548
Green
0.300
0.600
0.305
0.595
0.290
0.600
0.265
0.690
Cyan
0.225
0.329
0.228
0.326
0.220
0.329
0.205
0.360
Blue
0.150
0.060
0.155
0.070
0.150
0.060
0.150
0.060
Magenta
0.321
0.154
0.318
0.162
0.328
0.158
0.342
0.154
Note