Philips W10162446A Leaflet

Page of 2
1
Connect
Placement
Proper speakers system placement is important to 
ensure optimum sound performance.
A
B
C
C
D
D
A
  Place the center speaker above or close to the TV.
B
  Place the subwoofer on the floor, at least one meter 
away from the TV.
C
  Place the front speakers at equal disctances from the 
TV.
D
  Place the rear speakers at normal listening ear level.
2
Set up
Connect the radio antennas
Keep the antennas away from the electronic devices to 
prevent unwanted interference.
A
B
C
A
  Connect the FM antenna to the FM jack.  Extend the 
wire and fix its end to the wall.
B
  Unfold the AM loop antenna and fix the claw into 
the slot.
C
  Connect the AM loop antenna to the AM jack.  Place 
the AM loop antenna on a shelf, or attach it to a 
stand or wall.
Connect the speakers and 
subwoofer
Connect the various colored plugs from the speakers 
and subwoofer to the same colored jacks at the rear of 
the DVD system.
DVD System (rear)
REAR 
LEFT
REAR 
RIGHT
FRONT 
LEFT
FRONT 
RIGHT
FRONT
CENTER
SUB-
WOOFER
Finding the viewing channel
A
 Press STANDBY ON on the DVD system. 
B
 Press SOURCE on the DVD system until “DISC” 
appears on the display panel. 
C
  Turn on the TV.  Use the TV’s remote control to 
select the correct viewing channel for the DVD 
system.
 
You should see the blue DVD background on the 
TV.
Note   To search for the correct viewing channel, 
press the Channel Down button on the TV’s remote 
control repeatedly (or AV, SELECT, 
°
 button) until 
you see the blue DVD background.
Select the display language on the 
screen
A
 Press SETUP.  
The setup menu appears.  Use WXTS keys on the 
remote control to navigate in the menu.
B
 Highlight   icon and press T.  Move to 
 in the 
menu and press X.
C
  Move to { MENU LANG } in the menu and press X.
D
 Use TS keys to select a language option in the 
menu and press OK to confirm. 
E
 Press SETUP to exit.
Note  The language set here is only for the menus 
that are shown on the TV while operating this DVD 
system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video 
Setup, Preference Setup) available on this DVD system.  
Refer to the user manual for more information. 
Connect the DVD system to TV
A
B
A
  Use the supplied composite video cable to connect 
the CVBS jack on this DVD system to the VIDEO IN 
jack on your TV.
B
  Plug in the power cable from the DVD system to an 
AC power outlet.
Note   It is important to connect the DVD system 
directly to your TV.  
DVD System (rear)
Television ( rear)
Connect the audio from other 
device to DVD system (optional)
Use the red and white audio cables to connect the 
AUX IN (R/L) jackts on this DVD system to the AUDIO 
output jacks on your Audio/Video device (for example, 
DVD recorder, VCR).
b
AUDIO 
OUT
AUDIO OUT
Note   Press TV/AUX/DI on the remote control to 
get the sound output from the speakers system when 
watching the TV program.  
DVD System 
(rear)
DVD System (rear)