Sunfire Home Theater System User Manual

Page of 20
16
5SERgS
Specifi cations
Amplifi er Output
1,500 Watts rms (4.6 
Ω impedance)
High Cut Filter
30 Hz - 100 Hz adjustable. The 
crossover can be bypassed by rotating 
the crossover fre quen cy control fully 
clockwise.
Frequency Re sponse
22 Hz - 100 Hz
Power Line Voltage
AC 120 V/60 Hz
Dimensions
9" x 9" x 9"
Weight
29 lbs
Finish
Black anodized control plate, and dark 
rosewood lacquer cabinet.
Line Power Con sump tion:
300 W average, 22 Hz to 100 Hz, at 
ab so lute maximum continuous output.
1200 W peak, time limited basis       
Output Levels:
Greater than 108 dB peak SPL (includes 
room gain) from 25 Hz to 90 Hz
A typical Sunfi re subwoofer can be 
ex pect ed to ‘best’ its specifi ed minimum 
peak SPL by several decibels.
Input Sensitivity for Full      
Out put:
240 mVrms from left input with volume 
control at 0 dB, 90 mVrms with volume 
control fully clockwise
*
0.48 Vrms from right input with volume 
control at 0 dB, 180 mVrms with volume 
control fully clockwise
*
Input Impedance:
30 K
Ω for Line-Level inputs
5.6 K
Ω for Speaker-Level inputs
Driver:
Extra large magnet and long throw 
me chan i cal design yield very high 
back-emf. The result is extraordinarily 
high operating effi ciency – that is, more 
acoustic output for each watt of input.
Internal System Gain:
42 dB from left input jack to speaker with 
the Bass Level control at 0 dB, 54 dB 
with the control fully clockwise
*
36 dB from right input jack to speaker 
with the Bass Level control at 0 dB,        
48 dB with the control fully clockwise
*
 *
The Sunfi re True Sub woof er utilizes 
differential gain on the left and right 
inputs to retain both L+R and L-R 
information.
© 2006  Sunfi re Corporation. 
All rights reserved. Sunfi re Corporation 
re serves the right to improve its products 
at any time. Therefore, specifi cations are 
subject to change without notice.
Manual part number 913-124-00 Rev D