Runco X-200i User Manual

Page of 118
Runco X-200i Series Installation/Operation Manual
45 
PRE
L
IMINAR
Y
Whitney (Prismatic) 
Anamorphic Lens 
Installation and 
Adjustment
The Whitney Anamorphic lens mount kit consists of everything shown in Figure 3-20. 
Some components shipped with your projector may differ slightly from what is shown in 
these instructions. 
Figure 3-20. Prismatic Anamorphic Lens Mounting Assembly - Exploded View
1.
Use the Height/Pitch Adjustment Screws (3) and Washers (2) to attach the Lens 
Mounting Bracket (5) to the Anamorphic Lens (1).
2.
Remove the nut and rubber collar from each Swell Latch Assembly (4). 
3.
Secure the lens (with the mounting bracket attached) to the Lens Base Plate (6) using 
the swell latches. 
 
 
To avoid clipping the corners of the image, position the anamorphic 
lens as close as possible to the primary lens. 
3    Height/Pitch
      Adjustment 
      Screw,
      4-40 x 1/4"  
      (4x)
4    Swell
      Latch    
      Assembly     
      (2x)
1    Anamorphic Lens
2    Washer (4x)
6    Anamorphic Lens
      Base Plate
5    Anamorphic Lens
      Mounting Bracket
Tip