Sony HT-SS100 User Manual

You can install your speakers on the wall.

Prepare screws (not supplied)
that are suitable for the hook on
the back of each speaker. See
the illustrations below.

Fasten the screws to the wall.
The screws should protrude

5 mm to 7 mm.

For the center speaker

For the front speakers of HT-SF100

For the surround speakers of HT-SF100

For the front speakers and surround
speakers of HT-SS100

Hang the speakers on the
screws.

Notes

• Use screws that are suitable for the wall material

and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.

• Contact a screw shop or installer regarding the

wall material or screws to be used.

• Sony is not responsible for accident or damage

caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.

• For HT-SF100, if you install the speakers on the

wall, you do not need to attach the supplied
speaker stand.

Installing the speakers on the
wall

4 mm

more than 25 mm

4.6 mm

10 mm

Hook on the back of the speaker

5 mm to 7 mm

160 mm

5 mm to 7 mm

217 mm

5 mm to 7 mm

100 mm

5 mm to 7 mm

4.6 mm

10 mm

Rear of speaker