Sony HT-SS1200 User Manual

Page of 68
12
GB
D:\Chin Meng's job\SONY-HA\HT-SF1200_R2\1200_data\3210767121\GB03CON_HT-SF1200-
CEL.fm
masterpage: Left
[HT-SF1200/HT-SS1200]
3-210-767-12
(2)
Before you install the speaker and sub woofer, 
be sure to attach the supplied foot pads to 
prevent vibration or movement as shown in the 
illustration below.
Example of HT-SS1200 front 
speaker
HT-SF1200 only
You need to attach the supplied foot pads to 
the center speaker and sub woofer only.
HT-SS1200 only
You need to attach the supplied foot pads to all 
the speakers and sub woofer.
HT-SS1200 only
For greater flexibility in positioning the 
speakers, use the optional WS-FV11 or 
WS-FV10D speaker stand (available only in 
certain countries). Be sure to detach the screw 
from the speaker and use it when you install 
the speaker to the speaker stand. For details, 
refer to operating instructions supplied with 
the speaker stand.
HT-SF1200 only
For greater flexibility in positioning the 
speakers, use the supplied speaker stand. For 
details, refer to supplied speaker stand 
installation guide.
You can install your speakers on the wall.
1
Prepare screws (not supplied) 
that are suitable for the hook on 
the back of each speaker. See 
the illustrations below.
2
Fasten the screws to the wall. 
The screws should protrude 5 
to 7 mm.
3
Hang the speakers on the 
screws.
Installing the speakers on a flat 
surface
Installing the speakers on the 
speaker stand
Installing the speakers on the 
wall
4 mm
more than 25 mm
Hook on the back of the speaker
4.5 mm
5 to 7 mm