Sony HT-SS1200 User Manual

D:\Chin Meng's job\SONY-HA\HT-SF1200_R2\1200_data\3210767121\GB06OTH_HT-SF1200-
CEL.fm

[HT-SF1200/HT-SS1200]

3-210-767-12

(2)

 

 

 

 

 

 

 

• Make sure you have connected to both the 

L and R jacks of an analog component, and 
not only to either the L or R jack. Use an 
audio cord (not supplied).

• Check the setting of HDMI AUDIO in the 

• Check the HDMI connection.
• You cannot listen to the Super Audio CD 

by connecting HDMI.

• Depending on the playback component, 

you may need to set up the component. 
Refer to the operating instructions 
supplied with each component.

• Check that the speakers and components 

are connected correctly and securely.

• Adjust the balance parameters using the 

LEVEL menu (page 36).

• Check that the speakers and components 

are connected securely.

• Check that the connecting cords are away 

from a transformer or motor, and at least  
3 m (10 ft) away from a TV set or 
fluorescent light.

• Move your audio components away from 

the TV.

• The plugs and jacks are dirty. Wipe them 

with a cloth slightly moistened with 
alcohol.

• Check that the IN MODE is not set to 

“AUTO IN” for the selected input (page 
52).

• Select a CINEMA STUDIO EX mode 

• Adjust the speaker level (page 28).
• Check that the speakers are connected 

securely.

• Check that the sub woofer is connected 

correctly and securely.

• Make sure you have selected a sound field 

with MOVIE or MUSIC button.

• Sound fields do not function for signals 

with a sampling frequency of more than 
48 kHz.

• Check that the DVD, etc. you are playing 

is recorded in Dolby Digital or DTS 
format.

• When connecting the DVD player, etc., to 

the digital input jacks of this receiver, 
check the audio setting (the settings for the 
audio output) of the connected component.