Sony DAV-HDX686W User Manual
35
US
Ge
tting Star
tting Star
te
d
To attach the cover to the
surround amplifier
surround amplifier
After connecting and setting, you can attach the
cover to the surround amplifier for organizing
and storing excess speaker cords.
cover to the surround amplifier for organizing
and storing excess speaker cords.
1
Attach the speaker cord cover by
sliding it down along the grooves at the
edges of the surround amplifier.
sliding it down along the grooves at the
edges of the surround amplifier.
Push the speaker cord cover down until you
hear a click. Turn the surround amplifier
upside down, then store the cords in the
speaker cord cover.
hear a click. Turn the surround amplifier
upside down, then store the cords in the
speaker cord cover.
2
Insert the tabs of the speaker cord
holder in the slots of the speaker cord
cover, and press it into place.
holder in the slots of the speaker cord
cover, and press it into place.
Step 4: Performing the
Quick Setup
Quick Setup
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the area.
adjustments for using the system.
Displayed items vary depending on the area.
1
Turn on the TV.
2
Press [/1 on the unit, and POWER on
the surround amplifier.
the surround amplifier.
Note
• Make sure that the function is set to “DVD”
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
that the signal from the system
appears on the TV screen.
[Press [
ENTER
] to run QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 37).
this message does not appear, recall the
Quick Setup display (page 37).
4
Press
without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
language used in the on-screen display
appears.
Speaker cord cover
Surround amplifier
Grooves
Speaker cord holder
Surround amplifier
m
"/1
DISPLAY
C/X/x/c,