Sony HT-7100DH User Manual

Page of 84
69
US
D:\CANNES\SONY_HA\JOB 2007\IM\HT-7100DH\US_HT-7100DH_data\US06OTH_HT-7100DH-
U.fm
masterpage: Right
HT-7100DH
3-093-550-11 (1)
Other Oper
ations
Recording using the 
receiver
You can record onto a CD-R using the 
receiver. See the operating instructions 
supplied with your CD.
1
Press one of the input buttons 
to select the playback 
component.
You can also use INPUT SELECTOR on 
the receiver.
2
Prepare the playback 
component for playing.
For example, tune the radio station you 
want to record.
3
Prepare the recording 
component.
Insert a CD-R into the CD recorder and 
adjust the recording level.
4
Start recording on the 
recording component, then 
start playback on the playback 
component.
Note
Sound adjustments do not affect the signal output 
from the SA-CD/CD/CD-R OUT jacks.
You can record from an video component 
using the receiver. See the operating 
instructions supplied with your recording 
component.
1
Press one of the input buttons 
to select the playback 
component.
You can also use INPUT SELECTOR on 
the receiver.
2
Prepare the playback 
component for playing.
For example, insert the video tape you 
want to copy into the VCR.
3
Prepare the recording 
component.
Insert a blank video tape, etc. into the 
recording component (VIDEO 1) for 
recording.
4
Start recording on the 
recording component, then 
start playback on the playback 
component.
Notes
• Some sources contain copy guards to prevent 
recording. In this case, you may not be able to 
record from the source.
• When DMPORT input is selected and you have 
assigned VIDEO 1 input to DMPORT input, no 
video signals are output from the VIDEO 1 VIDEO 
OUT jack.
Recording onto a CD-R
Recording onto a recording 
media