Sony HM-982RW User Manual
Menu mode
19
Knowledge section
Preparation section
Application section
Basic section
Example for adjusting at
1:30PM
1:30PM
1 Adjust the figure of hours by pressing the MULTI
CONTROL keys.
2 Press the SET key.
1 Adjust the figure of minute by pressing the MULTI
CONTROL keys.
2 Press the SET key.
Enter the minute.
Enter the hour.
This unit incorporates a clock function. Be sure to ad-
just the correct time before using the timer function.
just the correct time before using the timer function.
1
Activate the clock adjustment mode.
2
3
Clock adjustment
÷ The time display starts to blink.
÷ Press the SET key. The hour is entered and the minute
display starts to blink.
÷ The clock shows the time of the day in the 24-hour system.
÷ If you pressed the SET key by mistake, press the MENU key
and restart from the beginning.
÷ To adjust correct time, press the SET key at the same
moment as a time announcement.
Press and hold for more than 2 sec.
Blinks
Blinks
1
Setting the hour
1 Setting the minute
To put back
the time
the time
To advance
the time
the time
Switching the power ON
If there is a power failure or the power cord is
unplugged then plugged in again while the power is
set to off (STANDBY mode) after a timer is activated,
the STANDBY/TIMER indicator blinks in green. In
this case, adjust the clock again.
unplugged then plugged in again while the power is
set to off (STANDBY mode) after a timer is activated,
the STANDBY/TIMER indicator blinks in green. In
this case, adjust the clock again.
Blinks
MENU
#
#
MULTI
CONTROL
SET
SET
T I M E
A d j u s t
A d j u s t
\
0 : 0 0
1 3 : 3 0
1 3 : 0 0
To put back
the time
the time
To advance
the time
the time
#
#
MULTI
CONTROL
When power is OFF (standby) :
Pressing the
7 (stop) key on the main unit or the 7
STOP key on the remote displays the time for 5
seconds.
seconds.