Sony HM-982RW User Manual
57
Knowledge section
Preparation section
Application section
Basic section
Convenient recording of CD player output
This system judges whether high-speed re-
cording of each track within 74 minutes af-
ter its previous high-speed recording is per-
mitted or not based on the specific data re-
corded for each track (ISRC: International
Standard Recording Code).
cording of each track within 74 minutes af-
ter its previous high-speed recording is per-
mitted or not based on the specific data re-
corded for each track (ISRC: International
Standard Recording Code).
High-speed recording of a disc containing a certain
track may not be able to be started within 74 min-
utes after the specific track was recorded at the High
speed. In this case, the time until the high-speed
recording will become ready is displayed.
track may not be able to be started within 74 min-
utes after the specific track was recorded at the High
speed. In this case, the time until the high-speed
recording will become ready is displayed.
To interrupt a recording
Press the
7 (stop) key on the main unit or 7 STOP
key on the remote. (This stops both recording and
playback.)
playback.)
Display "CDR Writing" indicates that recorded data is
being written in the CD-R/RW. Do not apply vibra-
tions or impact during recording and "CDR Writing"
display.
If the power cord is unplugged from the power outlet
or a power failure occurs during recording, the disc
data may be destroyed and the disc may become
unusable.
being written in the CD-R/RW. Do not apply vibra-
tions or impact during recording and "CDR Writing"
display.
If the power cord is unplugged from the power outlet
or a power failure occurs during recording, the disc
data may be destroyed and the disc may become
unusable.
To finalize the recorded CD-R/RW
∏
÷ "CDR Writing" is displayed when recording completes.
If you want to record the disc immediately, use the
normal-speed recording.
normal-speed recording.
W a i t
7 4 m i n .
7 4 m i n .
Note
Note
During digital-to-digital recording, the CD recorder
may encounter a track with which digital-to-digital
recording is prohibited. In this case, "SCMS"(
may encounter a track with which digital-to-digital
recording is prohibited. In this case, "SCMS"(
A) is
displayed and recording pauses temporarily, but play-
back of the source continues and recording restarts
whenever a track with which digital-to-digital record-
ing is permitted is encountered. However, if "SCMS"
is displayed with the first track to be recorded, the
track as well as the subsequent tracks will not be
recorded.
back of the source continues and recording restarts
whenever a track with which digital-to-digital record-
ing is permitted is encountered. However, if "SCMS"
is displayed with the first track to be recorded, the
track as well as the subsequent tracks will not be
recorded.