Sony HT-AF5 User Manual
17
GB
Getting Star
ted
Tips
• The angle A should be the same.
• Since the subwoofer does not emit highly
directional signals, you can place it wherever you
want. However, it is recommended to place the
subwoofer on the front edge of a table or rack, etc.,
to accept the remote signal correctly.
want. However, it is recommended to place the
subwoofer on the front edge of a table or rack, etc.,
to accept the remote signal correctly.
For greater flexibility in positioning the
speakers, you are recommended to use the
speaker stand as below.
speakers, you are recommended to use the
speaker stand as below.
The front speakers of HT-AF5 is provided
with the speaker stand, you need to
disassemble the speakers.
Install the front speakers on the wall. Keep the
speaker stand for future use.
with the speaker stand, you need to
disassemble the speakers.
Install the front speakers on the wall. Keep the
speaker stand for future use.
To disassemble the front
speakers of HT-AF5
speakers of HT-AF5
(SS-TSB104)
1
Disconnect the speaker cords.
2
Remove the screw
(pre-installed) at the rear of the
speaker.
speaker.
This screw is used when reassembling the
speaker. Be sure not to lose the screw.
speaker. Be sure not to lose the screw.
Installing the speakers on the
speaker stand
speaker stand
Model
Speaker stand
HT-AF5
Supplied. For details, refer to
the supplied Quick Setup
Guide.
the supplied Quick Setup
Guide.
HT-AS5
Optional WS-FV11 or
WS-FV10D speaker stand
(available only in certain
countries).
For details, refer to the
operating instructions supplied
with the speaker stand.
(available only in certain
countries).
For details, refer to the
operating instructions supplied
with the speaker stand.
30°
30°
100°-120°
100°-120°
A
A
Installing the speakers on the
wall
wall
Rear of the speaker
Screw
Rear of the speaker
continued