Sony HT-AF5 User Manual

If you use multiple wireless systems which 
sharing the 2.4 GHz band, such as wireless 
LAN or Bluetooth, the transmission of S-AIR 
products or other wireless systems may be 
unstable. In this case, the transmission may be 
improved by changing the following “RF 
CHANGE” setting.

“LEVEL” appears on the display.

V/v repeatedly until  

b.

V/v repeatedly until  

b.

V/v repeatedly until the 

 

• RF AUTO: Normally select this. The 

system change “RF CHANGE” to 

 

“RF ON” or “RF OFF” automatically.

• RF ON: The system transmits sound by 

searching the better channel for 
transmitting.

• RF OFF: The system transmits sound by 

fixing the channel for transmitting.

The AMP MENU turns off.

• When the wireless transmitter is not inserted in the 

S-AIR main unit, you cannot set “RF CHANGE”.

• In most cases, you will not need to change this 

setting.

• If “RF CHANGE” is set to “RF OFF,” 

transmission between the S-AIR main unit and 

 

S-AIR sub unit can be performed using one of the 
following channels.

– S-AIR ID A: equivalent channel for IEEE 

802.11b/g channel 1

– S-AIR ID B: equivalent channel for IEEE 

802.11b/g channel 6

– S-AIR ID C: equivalent channel for IEEE 

802.11b/g channel 11

• The transmission may be improved by changing 

the transmission channel (frequency) of the other 
wireless system(s). For details, refer to the 
operating instructions of the other wireless 
system(s).

MENU

AMP 
MENU

,

 

V/v/B/b