Sony HT-AS5 User Manual

• The connector of the speaker cords are the 

same colour as the speaker jack to be 
connected. When connecting a speaker cord, 
be sure to match the coloured connector to 
the speaker jack on the subwoofer:

• Be sure to match the speaker cords to the 

appropriate terminals on the speakers: the 
speaker cord with the colour tube to e 
terminal, and the speaker cord without the 
colour tube to E terminal.

Check the speaker type by referring to the 
speaker label at the rear panel of the speakers.

For details on the speaker type, see page 5 (for 

 

HT-AF5 only) or page 6 (for HT-AS5 only)

Before connecting the cords, be sure to 
disconnect the AC power cord (mains lead).
It is not necessary to connect all the cords. 
Connect audio and video cords according to 
the jacks of your components.
After hooking up all your components, 
proceed to “4: Connecting the antennas 
(aerials)” (page 25).

Sony recommends that you connect 
components to the system using an HDMI 
cable.
By connecting Sony “BRAVIA” Sync 
compatible components using HDMI cables, 
““BRAVIA” Sync Features” makes 
operations simpler (page 41).
When connecting components that are not 
compatible with “BRAVIA” Sync, set 

 

“CTRL HDMI” to “CTRL OFF” in the SET 
HDMI menu (page 43).

Red

FRONT R

White

FRONT L

Grey

SUR R

Blue

SUR L

Green

CENTER

FRONT L

Front left

FRONT R

Front right

CENTER

Center

SUR L

Surround left

SUR R

Surround right