Sony TH-M303 User Manual

Operating external components with the remote control

NOTE

• Manufacturers’ codes are subject to change without notice.
• Set the codes again after replacing the batteries of the remote control.

To set the manufacturer’s code

You can operate a JVC TV without setting the manufacturer’s code.

Slide the remote control mode selector
to TV.

Press and hold F TV.

Keep the button pressed until step 4 is finished.

Press ENTER.

Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).

Examples:
For a Hitachi TV:

Press 1, then 0.

For a Toshiba TV:

Press 0, then 8.

Release F TV.

If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.

Operation

Aim the remote control at the TV.

IMPORTANT
Before using the remote control to operate a TV;
• Set the remote control mode selector to TV.

The following buttons are available:
F TV:

Turns TV on and off.

TV VOL +/–:

Adjusts the volume.

TV/VIDEO:

Selects the input mode (either TV or
VIDEO).

CHANNEL +/–:

Changes the channels.

1-10, 0, +10 (100+): Selects the channel.
TV RETURN:

Alternates between the previously selected
channel and the current channel.

To set the manufacturer’s code

Slide the remote control mode selector
to VCR/DBS.

Press DBS.

Press and hold F VCR/DBS.

Keep the button pressed until step 5 is finished.

Press ENTER.

The buttons described below are used on pages 14 and
15.

Operating the TV

Remote control
mode selector

Number
buttons

(play button)

Manufacturer

Code

Manufacturer

Code

JVC

Samsung

Hitachi

Sharp

Magnavox

Sony

Mitsubishi

Toshiba

Panasonic

04, 11

Zenith

RCA

Operating the DBS tuner
or CATV converter

Continued on next page

TH-M508-303[A].book Page 14 Monday, April 12, 2004 5:22 PM