Sony DAV-DZ300 User Manual

Page of 100
68
GB
• This function is only for SONY TVs. (This function 
may not work on some SONY TVs.)
• If distance between TV and this system is too far, this 
function may not work. Install the system near the 
TV.
• Keep the remote pointed in the direction of the TV 
and this system while entering the code.
Selecting the connected 
component
You can use a VCR or other components 
connected to the SAT jacks on the rear panel or 
AUDIO IN jack on the front panel. Refer to the 
operation manual supplied with the components 
for further information on the operation.
Press FUNCTION repeatedly until “SAT” or 
“AUDIO” appears in the front panel display.
Each time you press FUNCTION, the mode of 
the system changes in the following sequence.
DVD 
t TUNER FM t TUNER AM t TV 
t SAT t AUDIO t DVD t …
Changing the output level of 
the sound from the AUDIO IN 
jack on the front panel
Depending on the component, distortion occurs 
because of the input level when listening to the 
component that is connected to the AUDIO IN 
jack on the front panel.
To prevent this, you can change the output level 
of the sound from the AUDIO IN jack on the 
front panel.
Note
Enjoying the Sound of 
Other Components
AMP MENU
X/x/c
ENTER
FUNCTION