Sony 3-298-611-11(1) User Manual
23
GB
Ge
tting Star
tting Star
te
d
16
Unplug the calibration mic and press
C/
c to select [YES].
Note
• The environment of the room in which the
system is installed may affect measurements.
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
17
Press .
Quick Setup is finished. All connections
and setup operations are complete.
and setup operations are complete.
To quit the Quick Setup
Press
DISPLAY in any Step.
Tip
• If you change the position of the speakers, reset the
speaker settings. See “Getting Optimal Surround
Sound for a Room” (page 76) and “Calibrating the
Appropriate Settings Automatically” (page 77).
Sound for a Room” (page 76) and “Calibrating the
Appropriate Settings Automatically” (page 77).
• If you want to change any of the settings, see “Using
To recall the Quick Setup display
1
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
“DVD” appears in the front panel
display.
2
Press
DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
TV screen.
3
Press
X/x to select
[SETUP],
then press
.
The options for [SETUP] appear.
4
Press
X/x to select [QUICK], then press
.
The Quick Setup display appears.
To select the type of video signal
output from the HDMI OUT jack
output from the HDMI OUT jack
When you connect the unit and the TV with the
HDMI cable, select the type of video signals
output from the HDMI OUT jack.
For details, refer also to the operating
instructions supplied with the TV/projector, etc.
HDMI cable, select the type of video signals
output from the HDMI OUT jack.
For details, refer also to the operating
instructions supplied with the TV/projector, etc.
1
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
“DVD” appears in the front panel
display.
2
Press
DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
TV screen.
3
Press
X/x to select
[SETUP],
then press
.
The options for [SETUP] appear.
4
Press
X/x to select [CUSTOM], then
press .
The Setup Display appears.
5
Press
X/x to select [HDMI SETUP], then
press .
The options for [HDMI SETUP] appear.
6
Press
X/x to select [HDMI
RESOLUTION], then press
.
7
Press
X/x to select the desired setting,
then press
.
• [AUTO (1920
×
1080p)]: The system
outputs the optimal video signal for the
connected TV.
connected TV.
• [1920
×
1080i]: The system outputs 1920
× 1080i* video signals.
• [1280
×
720p]: The system outputs 1280 ×
720p* video signals.
• [720
×
480p]**: The system outputs 720 ×
480p* video signals.
* i: interlace, p: progressive
** Depending on the country model, [720 × 480/
576p] may appear.
9 4 ( 9 9 )
CUSTOM
CUSTOM
DVD VIDEO
T 0 : 0 1 : 0 8
1 ( 1 )
QUICK
Setting the type of video
output to match your TV
output to match your TV