Sony HT-SF1000 User Manual

C:\Documents and 
Settings\pc13\Desktop\JC060000_2661769142SF1000_GB\2661769142\GB06OTH_HT-SF1000-
CEL.fm

model name1[HT-SF1000] 

model name2[HT-SS1000]

2-661-769-14

 (2)

• Check that the DVD, etc. you are playing 

is recorded in Dolby Digital or DTS 
format.

• When connecting the DVD player, etc., to 

the digital input jacks of this receiver, 
check the audio setting (the settings for the 
audio output) of the connected component.

• Use a 75-ohm coaxial cable (not supplied) 

to connect the receiver to an outdoor FM 
antenna as shown below. If you connect 
the receiver to an outdoor antenna, ground 
it against lightning. To prevent a gas 
explosion, do not connect the ground wire 
to a gas pipe.

• Check that the antennas are connected 

securely. Adjust the antennas and connect 
an external antenna, if necessary.

• The signal strength of the stations is too 

weak (when tuning in with automatic 
tuning). Use direct tuning (page 45).

• Make sure you set the tuning interval 

correctly (when tuning in AM stations 
with direct tuning).

• No stations have been preset or the preset 

stations have been cleared (when tuning by 
scanning preset stations). Preset the 
stations (page 47).

• Make sure that you are tuned to an FM 

RDS station.

• Select a stronger FM station.

• Contact the radio station and find out 

whether they actually provide the service 
in question. If so, the service may be 
temporarily out of order.

• Make sure you have connected the video 

output of your video component to the TV.

• Move your audio components away from 

the TV.

• Check the HDMI connection.
• Depending on the playback component, 

you may need to set up the component. 
Refer to the operating instructions 
supplied with each component.

AM

U

Receiver

To ground

Ground wire 
(not supplied) 

Outdoor FM antenna 

GB01COV_HT-SF1000-CEL.book  Page 55  Thursday, August 24, 2006  8:27 AM