Sony 4-147-229-13(1) User Manual

• When you do not connect the unit and TV with 

an HDMI cable, you cannot select [HDMI].

• When connecting the HDMI OUT jack and 

other video output jacks at the same time, select 
[Component Video].

• For details about video output resolution, see 

“Video Output Resolution” (page 99).

c.

The Setup Display for video output 
resolution selection appears. For details, see 
[Output Video Format] (page 77).

Select from [Auto], [480i], [480p], [720p], 
[1080i], or [1080p].
When connecting the HDMI OUT jack and 
other video output jacks at the same time, 
video signals may only output from the 
HDMI OUT jack when [Auto] or [1080p] is 
selected. 

Select from [480i], [480p], [720p], or 
[1080i].

A picture is displayed in the selected 
resolution for about 30 seconds, then the 
display asks for confirmation.
Follow the on-screen instructions and go to 
the next step.

• If the picture is distorted or no picture appears, 

wait for about 30 seconds without pressing any 
buttons. [Is this resolution OK?] appears. Select 
[Cancel]. The display returns to the resolution 
setting screen.

• If the selected video output resolution is 

incorrect, no picture appears on the screen. In 
this case, press and hold N and Z on the unit 
for more than 5 seconds to reset the video output 
resolution to the lowest resolution. To change 
the video output resolution, set [Output Video 
Format] in [Video Settings] (page 77).

c.

The Setup Display for selecting the aspect 
ratio of the TV to be connected appears.

X/x to select the setting that 

• [16:9]: If you have a wide-screen TV or a 

4:3 standard TV with a wide-screen mode. 
(page 76)

• [4:3]: If you have a 4:3 standard TV. 

c.

The Setup Display for the [Control for 
HDMI] function appears. Go to Step 12.

The Setup Display for [BD Internet 
Connection] appears. Go to Step 14.

Easy Setup 

- HDMI Resolution

Auto

The video switches for 30 seconds when this setting is changed.

Select the resolution to output to the TV. "Auto" is the standard selection.

Nothing is displayed on the screen if the resolution is incorrect.

Check that there are no problems with the video.

Easy Setup 

- Component Resolution

The video switches for 30 seconds when this setting is changed.

Select the resolution to output to the TV.

Nothing is displayed on the screen if the resolution is incorrect.

Check that there are no problems with the video.

Easy Setup 

- TV Type

Select the screen aspect ratio to match your TV.