Sony 3-299-549-12(1) User Manual

Refer to the operating instructions of the S-AIR 
receiver.

• It is easy to set the same ID for the S-AIR main unit 

and S-AIR sub unit to establish sound transmission. 
However, neighbours may also receive your system’s 
sound if IDs are the same, or you may receive the 
sound from neighbours. To prevent this, you can 
identify the S-AIR main unit with a specific S-AIR 
sub unit by performing the pairing operation 
(page 77).

You can enjoy the system’s sound by using the 
S-AIR receiver. The S-AIR receiver can be 
installed anywhere, regardless of the location of 
the S-AIR main unit, for enjoying the system’s 
sound in another room.

For details of the S-AIR receiver, refer to the 
operating instructions of the S-AIR receiver.

Set the ID of the S-AIR receiver to that 
of the S-AIR main unit.
• To set the ID of the S-AIR main unit, see 

“To set the ID of the S-AIR main unit” 
(page 75).

• To set the ID of the S-AIR receiver, refer 

to the operating instructions of the S-AIR 
receiver.

• When you are using another S-AIR sub unit, 

such as a surround amplifier, do not change the 
ID of the S-AIR main unit. Set the ID of the 
S-AIR receiver to the same ID as the S-AIR 
main unit.

• When you pair the S-AIR main unit and another 

S-AIR sub unit, such as a surround amplifier, by 
the pairing operation, you need to perform the 
pairing operation between the S-AIR main unit 
and the S-AIR receiver. For details, see 
“Identifying the S-AIR main unit with a specific 
S-AIR sub unit (Pairing operation)” (page 77).

 receiver.

The function changes in the same sequence 
as you press FUNCTION (page 41).

• When the sound is other than 2 channel stereo, multi 

channel sound is downmixed to 2 channel.

• The sound of the S-AIR receiver may be cut off by 

operation of the S-AIR main unit.

• Sound source is same with both the system and S-AIR 

receiver.

You can control the system from the S-AIR 
receiver by using the following buttons.

For details, refer to the operating instructions of 
the S-AIR receiver.

You can enjoy the S-AIR receiver while the 
S-AIR main unit is in standby mode by setting 
“S-AIR STBY” to “ON”.

X/x repeatedly until “S-AIR 

c.

X/x to select the desired setting.

• “ON”: You can enjoy the S-AIR receiver 

while the S-AIR main unit is in standby 
mode or turned on.

• “OFF”: You cannot enjoy the S-AIR 

receiver while the S-AIR main unit is in 
standby mode.

H

, X, x, 

.

/>

Share the same operations on the 
remote and control unit.

S-AIR CH

Change the function of the system.