Sony 3-295-946-12(1) User Manual

Page of 72
61
GB
 
 
 
 
 
 
 
Using the Remo
te
Changing button 
assignments
You can change the factory settings of the 
input buttons to suit the components in your 
system. For example, if you connect a DVD 
recorder to the VIDEO 1 jacks on the receiver, 
you can set the VIDEO 1 button on this remote 
to control the DVD recorder.
1
Hold down the input button of 
which you want to change the 
assignment.
Example: Hold down VIDEO 1.
2
Referring to the table below, 
press the corresponding 
button for the category you 
want.
Example: Press 4.
Now you can use the VIDEO 1 button to 
control the DVD recorder.
Categories and the 
corresponding buttons
a)
Sony VCRs are operated with a VTR 2 or VTR 3 
setting which correspond to 8 mm and VHS 
respectively.
b)
Sony DVD recorders are operated with a DVD1 or 
DVD3 setting. For details, refer to the operating 
instructions supplied with the DVD recorders.
c)
For details on the BD1 or BD3 setting, refer to the 
operating instructions supplied with the Blu-ray 
disc player or Blu-ray disc recorder.
To clear all remote button 
assignments
Press ?/1, DMPORT and MASTER VOL – at 
the same time.
The remote is reset to its factory settings.
Using the Remote
Categories
Press
VCR (command mode VTR 3)
a)
1
VCR (command mode VTR 2)
a)
2
DVD player/DVD recorder 
(command mode DVD1)
b)
3
DVD recorder
 
(command mode DVD3)
b)
4
CD player
5
Euro Digital Satellite Receiver
6
DVR (Digital CATV terminal)
7
DSS (Digital Satellite Receiver) 8
Blu-ray disc player
 
(command mode BD1)
c)
9
Blu-ray disc recorder
 
(command mode BD3)
c)
0/10
TV
-/--
Not assigned
ENTER/
MEMORY