Sony 5950DP User Manual
masterpage:Left
lename[E:\SEM_Janet\DATA_HT-
950DP\J9041386_25497361115950DPUS\2549736111\GB070TH_HT-5950DP-U.fm]
42
US
model name1[HT-5950DP]
model name2[HT-6900DP]
model name2[HT-6900DP]
model name3[HT-9900M]
[2-549-736-11(1)]
Recording on a video tape
You can record from a VCR, a TV or a DVD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or DVD player if you
need help.
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or DVD player if you
need help.
1
Select the program source to be
recorded.
recorded.
2
Prepare the component for playing.
For example, insert a video tape you want to
record into VCR.
record into VCR.
3
Insert a blank video tape into the VCR
(VIDEO 1) for recording.
(VIDEO 1) for recording.
4
Start recording on the recording VCR,
then start playing the video tape or
DVD you want to record.
then start playing the video tape or
DVD you want to record.
Tip
You can record the sound from any audio source onto
a video tape while copying from a video tape or DVD.
Locate the point where you want to start recording
from another audio source, select the program source,
then start playback. The audio from that source will be
recorded onto the audio track of the video tape instead
of the audio from the original medium. To resume
audio recording from the original medium, select the
video source again.
a video tape while copying from a video tape or DVD.
Locate the point where you want to start recording
from another audio source, select the program source,
then start playback. The audio from that source will be
recorded onto the audio track of the video tape instead
of the audio from the original medium. To resume
audio recording from the original medium, select the
video source again.
Notes
• You cannot record a digital audio signal using a
component connected to the analog VIDEO 1
AUDIO OUT jacks.
AUDIO OUT jacks.
• Make sure to make both digital and analog
connections to the VIDEO 2 and DVD inputs.
Analog recording is not possible if you make only
digital connections.
Analog recording is not possible if you make only
digital connections.
• The analog audio signals of the current input are
output from the VIDEO 1 AUDIO OUT jacks.
• (HT-9900M and HT-6900DP only) The signals input
to the MULTI CH IN jacks are not output from
VIDEO 1 AUDIO OUT jacks even when MULTI
CH IN is being used. The analog audio signals of the
current or previously used input are output.
VIDEO 1 AUDIO OUT jacks even when MULTI
CH IN is being used. The analog audio signals of the
current or previously used input are output.
GB01COV_HT-5950DP-U.book Page 42 Thursday, January 13, 2005 3:28 PM