HP (Hewlett-Packard) 2307890A User Manual

You must have two identical satellite receivers from the 
same source and the HP Digital Entertainment Center 
dual-tuner option (select models only) to set this up. This 
configuration will allow you to watch live TV on one 
channel and record another channel at the same time.

Connect the TV signal source from each satellite receiver 
into each HP Digital Entertainment Center tuner.

If you are using two matching satellite receivers with 
S-video or composite video output, do the following:

Make sure that a coaxial cable connector from your 
dish source is plugged into two cable outputs, and 
each satellite receiver In connector.

Connect a video cable for satellite receiver 1:

Choose a Video Out connector:

■

Video (composite)

■

S-video

Connect the video cable from the 
satellite receiver back panel video output 
connector.

Connect the video cable into the HP Digital 
Entertainment Center back panel TV Source 1 In 
connector.

Connect stereo audio cables for satellite receiver 1 
(skip this step if using coaxial [RF]):

From the satellite receiver back panel Audio Out 
right (red) connector and the Audio Out left 
(white) connectors.

Into the HP Digital Entertainment Center back 
panel TV Source 1 In Audio right (red) and Audio 
left (white) connectors.

Connect a video cable for satellite receiver 2:

Choose a video out connector, use the same type 
as satellite receiver 1:

■

Video (composite)

■

S-video

Connect the video cable from the 
satellite receiver back panel video output 
connector.

Connect the video cable into the HP Digital 
Entertainment Center back panel TV Source 2 In 
connector.

Connect stereo audio cables for satellite receiver 2 
(skip this step if using coaxial [RF]):

From the satellite receiver back panel Audio Out 
right (red) connector and Audio Out left (white) 
connectors.

Into the HP Digital Entertainment Center back 
panel TV Source 2 In Audio right (red) and Audio 
left (white) connectors.