Denon AVR-1610 User Manual

7

HDMI audio 
signals are not 
output from 
speakers.

• The  “Manual  Setup”  –  “HDMI 

Setup”  –  “HDMI  Audio  Out” 
setting is set to “TV”

• Set to “Amp”

27

No picture 
appears 
with HDMI 
connections.

• The  connections  to  the  HDMI 

connectors are faulty.

• HDMI input setting is improper.
• The  monitor  is  not  compatible 

with 

copyright 

protection 

(HDCP).

• The  HDMI  format  of  the  player 

and monitor do not match.

• Check the connections.

• Check the HDMI input setting.
• Connect  a  monitor  that  is 

compatible 

with 

copyright 

protection (HDCP).

• Match  the  HDMI  format  of  the 

player and monitor.

13

31
12

12

No sound is 
output from 
the monitor 
connected 
with HDMI 
connections.

• The  “Manual  Setup”  –  “HDMI 

Setup”  –  “HDMI  Audio  Out” 
setting is set to “Amp”.

• Set to “TV”.

27

When performing 
the following 
operations on a 
connected device, 
AVR-1610 has the 
same operations.

⋅ Power ON/OFF

⋅  Switching audio 

output devices

⋅  Adjust volume

⋅  Switch input 

source

•  HDMI’s 

CEC 

function 

is 

operating.

• Set  “Manual  Setup”  –  “HDMI 

Setup”  -–  “HDMI  Control”  to 
“OFF”.

 

When you only want to operate 
the power on/off each device, set 
“Power Off Control” to “OFF”.

27

G

HDMIH

iPod cannot be 
played.

• The  input  source  assigned  to 

“iPod Dock” is not selected.

• Cable is not properly connected.
• Control  dock  for  iPod’s  AC 

adapter  is  not  connected  to 
power outlet.

•

 

Switch  to  the  input  source 
assigned at “iPod Dock”.

• Reconnect.
• Plug  the  control  dock  for  iPod’s 

AC adapter into a power outlet.

31

14

–

G

iPodH

If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.

Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.