Axor 39233XX1 Assembly Instruction

3

Flush the supplies thoroughly before 

installation.

Install the metal washer and friction washer on 

the valve.  Push the valve up through the hole 

in the mounting surface.  Install the mounting 

plate.  

Rest the valve assembly on the mounting sur-

face.  Tighten the screws.

Place the handle assembly over the valve with 

the lever or cross in the desired off position.  

Hold the lever or cross steady with one hand.  

With the other hand, thread the escutcheon 

down over the mounting plate.

Assemble the spout:  Push the escutcheon 

onto the bottom of the spout (1).  Fasten the 

retaining screws with a 5mm allen wrench (2).  

Push the pull rod down through the spout.