Axor 39133XX1 Assembly Instruction

4

Sit the spout on the countertop.  Install the 

mounting piece mounting collar.

  

Attach the compression Y to the bottom of the 

spout fitting with the enclosed 10 mm compres-

sion fitting.  The metal side of the ferrule should 

point upwards. Tighten wrench tight.

Screw the connection hoses to the Y.  

Attach the hoses to the valves with the enclosed 

3/8“ compression fittings. Use two wrenches, 

as shown, to prevent the hoses from twisting.

Connect the valves to the stops with 1/2“ supp-

ly lines (not included).

Install the drain. 

Turn on the water and check all connections for 

leaks.   

3/4”

7/16”