Philips FC9166-9160 User Manual

The translucent display panel is made of recyclable polycarbonate (>PC/ABS<).
Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled

properly and in accordance with the instructions in this user manual, the appliance is safe to use

according to scientific evidence available today.

 1 

To connect the hose, push it firmly into the appliance (‘click’) (Fig. 2).

 2 

To disconnect the hose, push the buttons and pull the hose out of the appliance (Fig. 3).

 1 

To connect the tube to the handgrip, press the spring-loaded lock button on the handgrip

and insert the handgrip into the tube. Fit the spring-loaded lock button into the opening in

the tube (‘click’) (Fig. 4).

 2 

To disconnect the tube from the handgrip, press the spring-loaded lock button and pull the

handgrip out of the tube.

 3 

Adjust the tube to the length you find most comfortable during vacuuming. Press one of the

two collars downwards and pull the tube part above the collar upwards or push it

downwards (Fig. 5).

Keep the tube away from your face when you extend it. The tube is very long.

 1 

To connect and disconnect the Tri-Active nozzle, use the same method as for the tube.

The Tri-Active nozzle is a multi-purpose nozzle for carpets and hard floors (Fig. 6).

The side brushes catch more dust and dirt at the sides of the nozzle and allow you to clean better

along furniture and other obstacles.

The opening at the front of the nozzle allows you to vacuum larger particles (Fig. 7).

 2 

Hard floor setting: push the rocker switch on top of the nozzle with your foot to make the

brush strip come out of the housing. At the same time, the wheel is lifted to prevent

scratching and to increase manoeuvrability (Fig. 8).

 3 

Carpet setting: push the rocker switch again to make the brush strip disappear into the

nozzle housing. The wheel is lowered automatically (Fig. 9).
Crevice nozzle, small nozzle and brush nozzle

 1 

To connect the crevice nozzle (1), the small nozzle (2) or the brush nozzle (3), use the same

method as for the tube. (Fig. 10)

Connect the nozzles directly to the handgrip of the hose or to the tube.

Accessory holder
The accessory holder can be snapped onto the handgrip (Fig. 11).

To store nozzles in the accessory holder, push them into the holder. To detach the accessories, pull

them out of the holder.

You can store two accessories at a time in the accessory holder:

Crevice nozzle and small nozzle (Fig. 12).

Please note how the small nozzle must be placed in the accessory holder.

Crevice nozzle and brush nozzle (Fig. 13).

-

-

-

-

-

-

7