Panasonic MC-V7600 User Manual
- 22 -
Attachments
Crevice
Tool
Tool
Wand
Suceur plat
Tube
Herramienta
para hendiduras
para hendiduras
Tubo
Combination
Brush
Brush
Suceur
combiné
Cepillo de la
combinación
Cepillo de la
combinación
Air Turbine
Turbine à air
Turbina de aire
Identify each of the attachments shown.
➢
Remove the upper end of the hose
that is attached to the wand holder
by grasping the hose collar, twisting
and pulling straight out. The
attachments can now be added to
the hose.
that is attached to the wand holder
by grasping the hose collar, twisting
and pulling straight out. The
attachments can now be added to
the hose.
Note: The motor protector may open
when using attachments or when clean-
ing new carpet, due to reduced airflow
by the attachments themselves or by
new carpet lint filling the dust bin quick-
ly.
when using attachments or when clean-
ing new carpet, due to reduced airflow
by the attachments themselves or by
new carpet lint filling the dust bin quick-
ly.
Note: When using attachments make
sure the vacuum cleaner is in the
upright position and the Carpet/ Bare
Floor selector is in the BARE FLOOR
position.
sure the vacuum cleaner is in the
upright position and the Carpet/ Bare
Floor selector is in the BARE FLOOR
position.
➢
Remove combination brush from wand
or hose. Snap into appropriate storage
location.
or hose. Snap into appropriate storage
location.
➢
Remove crevice tool from the wand by
twisting. Store in end of wand.
twisting. Store in end of wand.
➢
Reattach the extension hose to the
wand holder and place wand in slot on
front of wand holder.
wand holder and place wand in slot on
front of wand holder.
➢
Reinsert Panasonic Air Turbine into the
vacuum cleaner as shown then close
the storage cover.
vacuum cleaner as shown then close
the storage cover.
Panasonic Air Turbine
Turbine à air Panasonic
Turbina de aire Panasonic
Turbina de aire Panasonic
Air Turbine
Storage Cover
Storage Cover
Couvercle de rangement
de la turbine à air
Cubierta de guardar
la turbina de aire