Emerson Series 3000 MVD User Manual
Configuration and Use Manual
107
Configuring Custody Transfer
Co
nfi
guri
nfi
guri
ng Custod
y
T
ran
sf
sf
er
Star
tup
Con
fig
urin
g Tic
kets
Con
fig
ur
in
in
g Di
gi
tal
Co
mm
Co
mm
u
n
ic
a
tio
ns
14.4
Configuring custody transfer (NTEP)
To configure custody transfer (NTEP):
1. Referring to Figure 14-1, set
World Area
to
NTEP
.
2. Ensure that the Series 3000 system, including the discrete batch application, is completely
configured and tested. Verify that the discrete batch flow source has been set to the process
variable to be used for custody transfer measurement (the transfer variable). Only the
following process variables are valid:
variable to be used for custody transfer measurement (the transfer variable). Only the
following process variables are valid:
-
Mass flow
-
Volume flow (liquid)
-
Gas standard volume flow
-
Frequency input
3. If you are using a Model 3500 or Model 3700 transmitter, perform a sensor zero. See
4. Referring to Section 13.3, use the Digital Communication menu and set
Protocol
to
Printer
.
5. Select
Configure Printer
and configure printer communications (see Section 13.3.2).
6. Configure ticket format and ticket printing as described in Section 15.5.
7. Set the security switch on your Series 3000 device. The security switch is a hardware switch.
Security does not take effect until the security switch is ON. Detailed instructions for the
different Series 3000 devices are provided in Section 14.6.
different Series 3000 devices are provided in Section 14.6.
8. Contact an authorized agent for installation of the Weights and Measures seal. Detailed
instructions for the different Series 3000 devices are provided in Section 14.7.
Table 14-1
Transaction measurement and management
Custody
transfer
type
transfer
type
Discrete
batch
application
batch
application
Method
Transfer variable
Transaction management
Legal receipt
NTEP
Required
Batch
• Batch total
• Measured by batch total
• Ended by:
• Ended by:
- Batch (NTEP) ticket printing,
manual or automatic
- Batch reset function
(manual)
• Batch (NTEP)
ticket
OIML
Not installed,
or installed
but not
approved
or installed
but not
approved
Transfer
• Mass total
• Volume total
• API corrected
• Volume total
• API corrected
volume total
(1)
• ED net mass total
(1) If approved.
• Measured by transfer total
• Ended manually by:
• Ended manually by:
- Transfer (OIML) ticket
printing
- Transfer reset function
• Transfer (OIML)
ticket
• Transfer log
OIML/batch
Installed and
approved
approved
Batch
• Batch total
• Measured by batch total
• Ended by:
• Ended by:
- Batch (OIML) ticket printing
(manual or automatic)
- Batch reset function
(manual)
• Batch (OIML)
ticket
Transfer
• Mass total
• Volume total
• API corrected
• Volume total
• API corrected
volume total
• ED net mass total
• Measured by transfer total
• Ended manually by:
• Ended manually by:
- Transfer (OIML) ticket
printing
- Transfer reset function
• Transfer (OIML)
ticket
• Transfer log