Emerson Series 3000 MVD User Manual
168
Micro Motion
®
Series 3000 MVD Transmitters and Controllers
Operation Mode – Custody Transfer
19.5.6
General use of Series 3000 device
This section describes the effect of custody transfer (OIML) and custody transfer (OIML/batch) on
specific Series 3000 device functions. Information in this section supplements the information in
Table 19-1.
specific Series 3000 device functions. Information in this section supplements the information in
Table 19-1.
Process monitor
Depending on configuration, the transfer variable may be marked with asterisks on the process
monitor (see Section 14.5, Step 5).
monitor (see Section 14.5, Step 5).
Alarm log password
If the alarm log password has been enabled (see Section 14.5, Step 7), operators will be prompted for
the alarm log password when they attempt to access the active alarm log, the alarm history, or the
event log.
the alarm log password when they attempt to access the active alarm log, the alarm history, or the
event log.
View menu
The View menu changes as follows:
•
Transfer Totalizer replaces Process Totalizers.
•
Transfer Log is added.
Figure 19-2
View menu – Custody transfer (OIML) and custody transfer (OIML/batch)
View
Preset
selections
(1)
Transfer
totalizer
(2)
Diagnostic
monitor
Active alarm
log
LCD
options
Process
monitoring
Batch
inventory
(1)
Transfer
log
Density
curves
(3)
(1) Displayed only if discrete batch application is installed.
(2) Buttons on Transfer Totalizer screen depend on configured Protocol.
(3) Displayed only if enhanced density application is installed.
(2) Buttons on Transfer Totalizer screen depend on configured Protocol.
(3) Displayed only if enhanced density application is installed.
Applications
list