Emerson Series 3000 MVD User Manual

Configuration and Use Manual

Installation

Using the

Dis

Di
gi

tal
Comm

un
ic

atio

ns
Se
tu
p

Be
fo

re
Y

Begin

Remote core processor with remote transmitter installations also require 9-wire cable. Micro Motion
offers three types of 9-wire cable: jacketed, shielded, and armored. Refer to Micro Motion’s 9-Wire
Flowmeter Cable Preparation and Installation Manual for detailed descriptions of these cable types
and for assistance in selecting the appropriate cable for your installation.

2.10.2

Cable glands in remote core processor with remote transmitter installations

Depending on your transmitter model, several different cable glands may be shipped with the
transmitter and core processor. Refer to Figure 2-1 to identify the cable glands supplied by Micro
Motion. Be sure to use the appropriate cable gland for each component and location.

Figure 2-1

Cable glands supplied by Micro Motion

2.11

I/O wiring

Note: This section applies to all Series 3000 devices.

2.11.1

Terminals and terminal block locations

To locate the I/O terminal blocks on your Series 3000 platform, see Figure 2-2. To identify the I/O
terminals, see the appropriate terminal label in Figure 2-3.

Cable gland

3/4˝–14 NPT

used with 9-wire conduit opening

Cable gland

1/2˝–14 NPT or M20 x1.5

used with 4-wire conduit opening

Transmitter model 3700*****B*****

Transmitter model 3700*****C*****

Transmitter models
• 3500**F********
• 3500**G********
• 3700**F********
• 3700**G********