Emerson Series 3000 MVD User Manual
Configuration and Use Manual
61
Con
fig
ur
in
in
g Batch
C
o
n
fi
gu
ri
ri
ng
Pr
oce
Pr
oce
ss Mon
ito
r
r
Con
fig
ur
in
in
g Ou
tpu
ts
Con
fig
ur
in
in
g Eve
n
ts
Chapter 8
Configuring Outputs
8.1
About this chapter
This chapter explains how to configure outputs. Outputs include all the software parameters listed in
Figure 8-1.
Figure 8-1.
Failure to perform configuration tasks in the proper sequence could result in an incomplete
configuration. See Section 1.7 for the recommended configuration sequence.
configuration. See Section 1.7 for the recommended configuration sequence.
8.2
Outputs menu
Use the Outputs menu, shown in Figure 8-1, to access and configure output parameters. The Outputs
menu is accessed through the Configuration option of the Management menu. To access the
Management menu, see Chapter 4. You will be configuring:
menu is accessed through the Configuration option of the Management menu. To access the
Management menu, see Chapter 4. You will be configuring:
•
Discrete outputs
•
Milliamp (mA) outputs
•
Frequency output
CAUTION
Changing configuration can affect device operation.
Set control devices for manual operation before changing device configuration.